Greyline SLT 5.0 Level & Flow Monitor

/in , /by

Level & Flow Monitor – Vancouver BC

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. We recommend the Greyline SLT 5.0 Level & Flow Monitor for Tank Inventory, Pump Control and Open Channel Flow measuring.

Greyline SLT 5.0 Level & Flow Monitor
Greyline SLT 5.0 Level & Flow Monitor

  • Accurate, Simple and Reliable
  • Chemical Tank Level
  • Sumps and Pump Stations
  • Flow through Flumes and Weirs
  • Simple 5-key Calibration
  • Isolated 4-20mA Output
  • Programmable Control Relays

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Measure Level
Specify SLT 5.0 for inventory monitoring and level control of chemicals, wastewater, viscous or corrosive liquids. Built-in control relays are programmable for pump control, pump alternation and level alarms.

Measure Flow
Displays, transmits and totalizes wastewater flow through any flume or weir. Features a simple, password protected calibration system, automatic totalizer and flow proportionate control relays.

No maintenance Sensor
Each SLT 5.0 includes a non-contacting ultrasonic sensor which mounts above the material being measured. There is no contact and no moving parts. The sensor is sealed to withstand accidental submersion and rated for hazardous locations with optional intrinsic safety barrier.

Simple Installation and Calibration
Mount the SLT 5.0 non-contacting ultrasonic sensor above the liquid to continuously monitor level or flow. The Sensor self-tunes to extended cable lengths so the electronics enclosure/display can be mounted at a convenient location.

Select LEVEL mode for Tank Inventory and Level Control
Set-up is fast and easy through the SLT 5.0 calibration menu. Use the built-in keypad to scroll through the menu prompts and configure the SLT 5.0 to display level in your choice of measurement units (ft, inches, meters, mm, gallons, liters, percent etc.) for vertical and horizontal round tanks. Connect external devices through the SLT 5.0′s isolated 4-20mA output or control relays.

Select FLOW mode for Open Channel applications
Calibration is easy with menu selection of common flumes including Parshall, Palmer Bowlus, Trapezoid and Weirs including V-Notch and Rectangular. Use Greyline’s PC software ‘Find K&n’ (included) to calibrate to non-standard or custom flumes and weirs.

Displays, Totalizes, Transmits & Controls
The SLT 5.0 large backlit digital display shows the flow rate, relay status and totalizer. Use the isolated 4-20mA output to transmit to chart recorders, and program the built in control relays for flow proportionate control (for samplers, chlorinators or external totalizers), and for flow/level alarms.

No Contact Sensor = No Maintenance
The SLT 5.0 Sensor mounts over the flume or weir, so there is no sensor fouling or maintenance required. With built-in temperature compensation, the SLT 5.0 maintains high accuracy (±0.25% of full scale) to meet environmental monitoring requirements.

Plug and Play Options
Need extra relays or a data logger? Just plug-in options like this 4-relay circuit
board to expand the functions of your SLT 5.0. The instrument auto-detects the new
cir circuit and automatically adds it to the calibration menu. With the original two relays
plus an additional four, the SLT 5.0 can handle complex level control applications

Advanced Operating System
You can control the SLT 5.0′s response to conditions like turbulence or splashing and to reject tank agitators. The SLT 5.0 automatically adjusts itself to obtain the best signal. False echoes are suppressed and filtered to accurately display the correct level.

Isolated 4-20mA Output
Ready for direct connection to PLC’s or computers and rated for 1000 ohm resistive load. Programmable offsets allow 4 and 20mA to be offset from the instrument calibration for special control applications.

Built-in 5-Key Calibrator – No Special Programming Codes
Scroll through the SLT 5.0 set-up menu to control the instrument’s operating features and calibration. Forget about Parameter codes and complex calculations! The SLT 5.0 automatically calculates, converts and displays common engineering units (metric, English, US). Program it for tank level…horizontal round tank volume…range or tape measure mode…or open channel flow.

Use output simulation mode to take manual control of the SLT 5.0 display, 4-20mA and control relays. You can test operation of equipment connected to the SLT 5.0 and confirm correct calibration. The standard sensor is constructed of PVC with a Teflon face and is designed to withstand accidental submersion.

Built-in temperature compensation maintains ±0.25% accuracy over the operating temperature range. Options include Intrinsic Safety for hazardous locations and all-Teflon or flange-mount construction for harsh, corrosive environments.

Greyline SLT 5.0 Level & Flow Monitor Availability

The Greyline SLT 5.0 Level & Flow Monitor is available in BC through Southwell Corp. We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Request A Quote

Applications for Greyline Flow Meter Products

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote

Greyline PSL 5.0 Pump Station Level Controller

/in , /by

Pump Station Level Controller – Vancouver BC

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. We recommend the Greyline PSL 5.0 Pump Station Level Controller for pump stations, wet wells and tank level control.

PSL 5.0 Pump Station Level Controller

  • 6 Control Relays
  • Programmable Pump Alternation
  • Relay Run Time Reports
  • Redundant Sensor Input
  • Isolated 4-20mA Output
  • Large Backlit Display

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Pump Station Level Control, Monitoring and Reporting
Designed for pump stations, wet wells and tank level control the new Greyline PSL 5.0 Pump Station Level Controller has six independently programmable control relays for pump or valve control, level alarms, autodialers, temperature or fault alarms.

No contact, No maintenance
Mount the non-contacting, ultrasonic sensor in the tank or wet well and install the watertight electronics in the control room or any location within 500 ft / 150 m. Use the simple menu system and built-in keypad to set up measurement range, relay set points and pump alternation sequence. A relay/pump run time report is updated and stored automatically for viewing on the instrument’s backlit LCD display.

Dual-Technology Sensor Feature – Redundant Level Sensing
Connect a submersible pressure sensor or other 4-20mA level transmitter to the PSL 5.0 for fail-safe hybrid sensing. The PSL 5.0 will auto-calibrate the redundant sensor and if signal is lost to the ultrasonic sensor, the redundant sensor will seamlessly take over monitoring until signal resumes from the ultrasonic. The redundant sensor is continuously monitored to ensure availability during primary sensor failure.

Easy to Install with Non-Contacting Sensor
The PSL 5.0 Pump Station Level Controller is designed for Pump Station and Tank Level Control applications. Mount the non-contacting ultrasonic sensor above the well or at the top of a tank. Use the built-in keypad to calibrate measurement span, relay set-points, pump alternation sequence and level alarms. Assign the six built-in control relays for ON/OFF pump control, Hi or Lo level alarms, autodialer activation, air temperature alarm or sensor echo loss alarm. Connect the isolated 4-20mA output to your SCADA system, PLC’s or recorders.

Redundant Sensor Level Control
The PSL 5.0 sets a new level of reliability. It operates with an ultrasonic level transducer as its primary sensor but also accepts connections from 4-20mA level sensors for redundancy. If the ultrasonic transducer loses signal from foam on the water surface for example, the redundant sensor will take over reading instantly. As soon as the ultrasonic sensor receives new echoes, it will resume function as the primary sensor.

An animated icon on the PSL 5.0 digital display indicates that the ultrasonic sensor is active. The icon indicates if the system automatically switches to the redundant sensor.

Calibration of the Redundant Sensor is Totally Automatic
You can use hydrostatic pressure sensors, radar, or any 4-20mA transmitter for redundant level sensing. The PSL 5.0 automatically scales and calibrates the redundant sensor during each pump cycle. Once the PSL has operated through at least one pump cycle, the redundant sensor will be calibrated and ready to function.

Ideal for Water, Wastewater and Process Automation
Use the PSL 5.0 Pump Station Level Controller for pump or level control and for
automatic pump alternation/sequencing. It is designed for the harsh operating conditions in wet well or tank level control applications. The non-contacting ultrasonic sensor mounts at the top of a wet well or tank, and you can connect a redundant 4-20mA level sensor for added reliability in challenging pump station applications.

Relay Run Time Reporting System
View the PSL 5.0 relay run time report directly on the backlit digital display. You can identify “lazy” pumps pump failures occur and plan pump maintenance to reduce call-outs and down-time. If a redundant level sensor is connected its operation time is also indicated.

Greyline Flow Meters are available in BC through Southwell Corp. We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Request A Quote

Applications for Greyline Flow Meter Products

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote

Greyline DLT 2.0 Differential Level Transmitter

/in , , /by

Differential Level Transmitter  – Vancouver BC

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. We recommend the Greyline DLT 2.0 Differential Level Transmitter  with Non-Contacting Sensors for Differential Level and Control AND Open Channel Flow Monitoring.

Greyline DLT 2.0 Differential Level Transmitter - for use in WWTP - from Fiberman
DLT 2.0 Differential Level Transmitter

  • Mechanical Barscreens Displays
  • Transmits and Controls Differential Level
  • Differential Level and Control AND Open Channel Flow Monitoring
  • Two Non-Contacting Ultrasonic Sensors

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Versatile, Easy to Use
Install one Sensor on each side of a barscreen to continuously monitor, transmit and control level. Use the built-in control relays or 4-20mA outputs to automatically activate the barscreen rake at preset levels.

One Instrument Does the Work of Three
The DLT 2.0 is a simple solution for barscreen level control at wastewater treatment plant headworks, pump stations and combined sewer systems. It includes two non-contacting ultrasonic sensors to measure level. With sensors positioned above a channel, up and downstream from the barscreen, the DLT 2.0 can display and transmit differential level. The downstream sensor can also be installed above a flume or weir to measure and totalize open channel flow.

Three 4-20mA outputs are configured to transmit upstream level, downstream level (or flow) and differential level. Built-in relays can be calibrated for level control, differential level control or open channel flow.

Greyline DLT 2.0 Differential Level Transmitter - for use in WWTP - from Fiberman

Barscreen Differential plus Open Channel Flow
Reduce costs and simplify instrumentation at treatment plant headworks. With a barscreen upstream from a flume, the DLT2.0 can measure BOTH differential level and flow through the flume with just two ultrasonic sensors and one electronics enclosure.

The DLT 2.0 includes three 4-20mA outputs. It displays flow rate and total flow through the flume, plus upstream level and differential level.

upstream diagram - Greyline DLT 2.0 Differential Level Transmitter - from Fiberman - WWTP flow monitoring

Barscreen Differential
Monitor, transmit and control barscreen level with one instrument. Ultrasonic sensors mount up and downstream from a barscreen. Use the isolated 4-20mA outputs or control relays to activate the screen’s cleaning rake at preset levels or differential level.

Greyline DLT 2.0 Differential Level Transmitter - from Fiberman - WWTP volume level monitoring

Two-Tank Inventory
Monitor level in two tanks with one instrument. The DLT 2.0 will alternate display of level in both tanks plus transmit 4-20mA outputs. Use the built-in relays to activate alarms or level controls. Calibration is easy with the DLT’s built-in keypad and menu system.

plume measurement - wwtp - Greyline DLT 2.0 Differential Level Transmitter

Submerged Flow Alarm
Parshall flumes can provide accurate flow measurement with the discharge submerged up to 70% (depending on flume size). Use the DLT 2.0 to measure flow through the flume and to activate an alarm when discharge level reaches critical submergence level.

Measures Level, Differential Level and Open Channel Flow
Includes Two Non-Contacting Ultrasonic Sensors

Barscreen control applications and sewage treatment plant headworks that used to require several instruments can all be monitored now by one ultrasonic level indicating transmitter. Install one sensor on each side of a barscreen (or any other flow obstruction) to continuously monitor and transmit differential level. Or mount the downstream sensor in a flume to measure differential level plus open channel flow.

The DLT 2.0 Differential Level Transmitter uses non-contacting ultrasonic sensors to monitor two independent levels. It can be programmed to display and transmit 4-20mA output including differential level, upstream level, downstream level or open channel flow. Two programmable relays are included for level alarm, differential control, flow control, flow pulse, flume submergence alarm, pump control or echo loss alarm. Four additional relays (six total) are optional.

The DLT 2.0 is ideal for automated barscreen monitoring and control. The instrument is accurate and easy to operate with its built-in keypad calibration system. The sensors are non-contacting so it requires no maintenance. Level/Flow readings are displayed on the large, backlit LCD display.

Options include Intrinsically Safe sensors for hazardous rated locations, extra control relays, enclosure heater, data logger and sensor cable up to 500 ft (150 m) length.

Greyline Flow Meters are available in BC through Southwell Corp. We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Request A Quote

Applications for Greyline Flow Meter Products

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote

Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter

/in , , /by

Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter

Multi-Sensor Area-Velocity Flow Meter – Vancouver BC

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. We recommend the Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter to Display, Transmit and Totalize Flow in Large Open Channels, Pipes and Culverts.

Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter

AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter

  • Display, Transmit and Totalize Flow
  • Large Open Channels, Pipes and Culverts
  • Multiple Velocity Sensors
  • Simple 5-key Calibration
  • Three 4-20mA Outputs
  • Two Control Relays
  • Works in Irregular Channel Shapes
  • Works in Irregular Flow Profiles

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Measures Velocity and Level to Monitor Flow with Multiple Ultrasonic Sensors
Monitor flow through large open channels, partially full sewer pipes and surcharged pipes without a flume or weir. Designed for municipal stormwater, stream flow, irrigation water, raw sewage, water intake channels, cooling water discharges and industrial effluent.

Submersible Ultrasonic Sensors
The AVMS 5.1 uses three submerged ultrasonic sensors to continuously measure both Velocity and Level in the channel. It is recommended for large channels or applications where velocity will vary across the width of the channel. The sensors resist fouling, corrosion and abrasion. The Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter offers excellence in flow meter technology.

The flowmeter can be configured with three standard submerged velocity-level sensors, or with three submerged velocity plus a separate non-contacting ultrasonic level sensor.

View flowrate and total flow on the large backlit LCD display and connect to external devices with three 4-20mA outputs and two control relays.

Multi-Sensor Flow Monitor for Open Channels & Partially Filled Pipes
The AVMS 5.1 Area-Velocity Flow Meter measures level and average velocity from multiple sensors to calculate flow in open channels or pipes. The system includes the AVMS 5.1 flowmeter with interconnect cable to a multi-sensor enclosure plus three submerged ultrasonic sensors.

The ultrasonic velocity sensors mount in the channel in positions where they will be submerged. Stainless steel mounting brackets included. The sensors are completely sealed with no orifices or ports. Level is measured by connecting the built-in level sensor from any one of the three velocity sensors, or with an optional non-contacting ultrasonic level sensor.
Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter

Q = V x A
To measure flow the AVMS 5.1 averages the velocity readings from its three submerged sensors. The level reading and channel dimensions provide the channel cross sectional area. Calibration is simple: enter the pipe diameter or channel dimensions and the AVMS 5.1 automatically computes and displays flow volume. Channels of virtually any shape can be monitored with your choice of measurement units.

Recommended Pipe or Channel Conditions
Channels greater than 2 m (6 ft) width or diameter may have significant variations in velocity across the channel width. By mounting three velocity sensors an average velocity profile is measured. The AVMS 5.1 will automatically factor out zero readings at low flow rates if one or more sensors are not submerged or become covered in sediment.

Careful selection of mounting location results in best performance and maintenance-free operation. Avoid locations where sediment builds up. The channel should not have drops or direction changes immediately upstream of the sensor and it should have a consistent cross section for one channel width upstream. Pipe or channel slope should not exceed 3%.

The AVMS 5.1 can measure forward velocity up to 20 ft/sec (6 m/sec) and up to 5 ft/sec (1.5 m/sec) reverse velocity. The electronics and software sample and average flow rates continuously to provide stable readings. The submerged velocity/level sensors will measure flow in partially full channels, culverts or surcharged pipes with pressure up to 10 psi.

Sensor Mounting Configurations
Sensors can be positioned across the channel to capture variations in flow velocity. One of the sensors is also used to measure level so it must be mounted at the bottom of the channel parallel to the water surface.

Optional Non-Contacting Level Sensor
An optional, non-contacting ultrasonic level sensor can be used for applications with turbulence or where level measurement from the channel bottom may be restricted by aeration or sediment. Each individual velocity and level sensor cable can be extended up to 500 ft (150 m) total length using an optional cable junction box.

The AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter includes three submerged ultrasonic sensors that are installed in an open pipe or channel. The sensors have no moving parts and no orifices, ports or electrodes. Each sensor is installed with a stainless steel mounting bracket and one screw into the pipe or channel wall.

Channels of any shape can be monitored. Forward and reverse flow can be measured and totalized. The AVMS 5.1 includes three 4-20mA outputs ( flow, level and velocity), plus two control relays for level alarms or flow proportionate pulse output for samplers and chlorinators.

The AVMS 5.1 is easy to calibrate with its 5-button keypad and menu system. Extra relays and a built-in 2-million point data logger with USB output are optional.

Greyline Flow Meters are available in BC through Southwell Corp. We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Request A Quote

Applications for Greyline Flow Meter Products

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote