Greyline DFM 5.1 Doppler Flow Meter

Greyline DFM 5.1 Doppler Flow Meter – Vancouver BC

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. The Greyline DFM 5.1 Doppler Flow Meter is a Simple, Non-Contacting Flow Meter for Accurate Flow Measurement from Outside a Pipe.

Greyline DFM 5.1 Doppler Flow Meter

Non-Contacting Flow Monitoring and Control

  • Displays, Transmits,
  • Totalizes and Controls
  • User-Friendly Calibration
  • Password Protected
  • Isolated 4-20mA Output
  • 2 Control Relays
  • Digital Signal Processing
  • Optional Intrinsic Safety

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Ultrasonic Sensor mounts on any Pipe

Greyline Doppler Flow Meters monitor the flow rate of dirty or aerated liquids including: wastewater, chemicals, acids, slurries, abrasives and viscous liquids. Recommended for full pipes and any fluid that contains solids or bubbles.

The DFM 5.1 strap-on sensor is mounted on the outside of a plastic or metal pipe ½ inch / 12.7 mm diameter or larger. To measure flow an acoustic signal is reflected back to the sensor from moving particles or gas bubbles suspended in the fluid.

Installation is easy – without shutting down the flow system. No contact is made with the moving fluid and no pipe cutting or drilling is required. There is no fouling or scale build-up on the sensor.

Backlit Matrix Display with Simple, 5-key Menu System
Calibration is easy with the new Greyline DFM 5.1 Doppler Flow Meter user-friendly menu system. Press the arrow keys to scroll through menus, change settings and enter calibration values. You can select English, French or Spanish menus, enable a password to protect settings and control brightness of the digital display.

Reverse Flow Measurement
The DFM 5.1 measures flow in either direction and displays positive or negative values. You can control the Totalizer to subtract reverse flow, or to totalize forward flow only. The 4mA setting can also be adjusted to a negative flow setting.

Optional Data Logger with USB Thumb Drive Support
Order your DFM 5.1 Doppler Flow Meter with an optional built-in 2 million point data logger. It includes Windows software to display flow charts and tables, and to create dynamic flow reports. Just plug in a standard USB flash drive and log files are downloaded automatically – and fast!

Principle of Operation
The DFM 5.1 Sensor transmits continuous high frequency sound through the pipe wall into the flowing liquid. Sound is reflected back to the Sensor from particles or gas bubbles in the liquid. If the liquid is flowing, the reflected sound returns at an altered frequency (the Doppler effect). The DFM 5.1 continuously measures this frequency shift to accurately measure flow.

New Enhanced Signal Processing for Reliable Accuracy
The DFM 5.1 Doppler flow algorithm filters out background noise and interference. The high speed digital signal processor discriminates against weak and distorted signals for increased reliability and accuracy. If the processor cannot measure accurately the meter will display zero flow.

The Greyline DFM 5.1 Doppler Flow Meter includes an ultrasonic sensor, a simple 5-key calibration system, a large digital flow rate display with totalizer, isolated 4-20mA output and two programmable control relays. Data logger and intrinsically safe sensor are optional.

Greyline DFM 5.1 Doppler Flow Meter Availability

Greyline DFM 5.1 Doppler Flow Meters are available in BC through Southwell Corp.

We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Request A Quote

Applications for Greyline Flow Meter Products”

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote

Greyline Stringray Level-Velocity Logger

Greyline Stringray Level-Velocity Logger Flow Meter – Vancouver, BC

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. The original and incredibly successful Stingray has been retired and we proudly introduce the Stingray 2.0 – with 4 important improvements:

  1. USB interface upgrade (replaces RS-232 output)
  2. Integrated faceplate design with no exposed cables or connectors
  3. New hydrodynamic sensor design
  4. New battery pack

Greyline Stringray Level-Velocity Logger

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Greyline Stingray 2.0 Portable Level-Velocity Logger

Greyline Stringray Level-Velocity Logger

Measures Level, Velocity + Temperature in Open Pipes and Channels

Portable, Battery-powered
This compact new meter operates on standard alkaline batteries for extended time periods to data log level, velocity and water temperature in open channels, partially full sewer pipes and surcharged pipes without a flume or weir. It is designed for municipal stormwater, combined effluent, raw sewage, irrigation water and stream flow.

Streamlined Ultrasonic Sensor
Stingray 2.0 uses a hydrodynamic ultrasonic sensor to accurately measure both velocity and level in the channel. The submerged sensor has no moving parts and is resistant to fouling and corrosion.

Portable Area-Velocity Meter
Stingray 2.0 measures level and velocity in open channels or pipes. No calibration is required. The sensor is a completely sealed ultrasonic unit with no orifices or ports. It mounts inside the pipe or at the bottom of a channel. The watertight electronics enclosure is hung in the manhole or at a convenient location. Sensor, mounting bracket, batteries, software and cables are included with each Stingray.

Check out this video: “Stingray 2.0 Monitors Diversion Water”:

Powered by Standard Alkaline Batteries
With 4 D-cell Alkaline batteries the Stingray 2.0 will operate up to 4 years! These low-cost batteries are available in stores everywhere and with an extremely low self discharge rate they will reliably power the energy-efficient Stingray 2.0 for the duration of your flow study.

Stores 130,000 Data Points
Stingray 2.0 stores up to 130,000 data points including level, velocity and water temperature. Between readings it hibernates to conserve energy.

USB Data Download
Connect your laptop or PC to the Greyline Stringray Level-Velocity Logger USB output to view realtime level and velocity readings, view remaining logger and battery capacity and to set the Stingray 2.0 logging interval.

Greyline Stringray Level-Velocity Logger Availability

Greyline Stringray Level-Velocity Logger Flow Meters are available in BC through Southwell Corp.

We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Request A Quote

Applications for Greyline Flow Meter Products

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote

Greyline AVFM 5.0 Area-Velocity Flow Meter

Greyline AVFM 5.0 Area-Velocity Flow Meter – Vancouver BC

Greyline AVFM 5.0
Area-Velocity Flow Meter for Open Channels and Pipes – No Flume or Weir Required

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. The AVFM 5.0 Area-Velocity Flow Meter measures both Level and Velocity to calculate flow in an open channel or pipe.

Greyline AVFM 5.0 Area-Velocity Flow Meter
The AVFM 5.0 Area-Velocity Flow Meter
  • Measures Velocity + Level with an Ultrasonic Sensor to Monitor Flow
  • Display, Transmit and Totalize Flow in Open Channels and Pipes
  • Simple 5-key Calibration
  • Three 4-20mA Outputs
  • Two Control Relays
  • Measures Reverse Flow
  • Works in Irregular Channel Shapes

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Easy to Use
Calibration is simple: enter the pipe diameter or channel dimensions and the Greyline AVFM 5.0 Area-Velocity Flow Meter automatically computes and displays flow volume.

The ultrasonic sensor mounts inside the pipe or on the bottom of a channel with a stainless steel mounting bracket (included) and a single screw into the bottom of the pipe or channel. No special compounds, tools or hardware are required. The sensor is completely sealed with no orifices or ports.
Greyline AVFM 5.0 Area-Velocity Flow Meter submerged sensor illustration
Recommended Pipe or Channel Conditions
The Greyline AVFM 5.0 Area-Velocity Flow Meter can measure forward flow velocity up to 20 ft/sec (6 m/sec) and reverse flow up to 5 ft/sec (1.5 m/sec). The electronics and software sample and average flow rates continuously to provide stable readings. The submerged velocity/level sensor will measure flow in partially full and surcharged pipes with pressure up to 10 psi. No special set-up or adjustment is required. Minimum recommended pipe diameter is 6” (150 mm).

Alternate Sensor Configurations
The standard sensor measures both velocity and level with a single submerged probe. It is installed in the pipe or channel floor with the stainless steel mounting bracket (supplied), or mounted with an optional stainless steel band for round pipes. Alternate sensor models are available for special applications: a separate non-contacting ultrasonic level sensor with a submerged velocity sensor. Sensor cable can be extended up to 500 ft (150 m).

Custom Channel Shapes
Calibrate the AVFM 5.0 for installation in irregular or compound channel shapes by entering the channel width at multiple level points through a simple menu. Channels of virtually any shape can be monitored with your choice of measurement units.

Optional 2-Million Point Data Logger
Choose the built-in data logger option if you want the Greyline AVFM 5.0 Area-Velocity Flow Meter to store time and date-stamped flow values at 10 second to 60 minute intervals. Transfer log files to any USB flash drive just by connecting to the logger’s USB output. Windows software is included to display log files in graph and table formats, change measurement units and generate flow reports. Export data to Excel.

  • Measures Velocity + Level to calculate Flow
  • Measure flow in pipes and open channels of any shape
  • Ideal where flumes or weirs are difficult to install
  • Works with water level from 1″ (25.4 mm) to 15 ft (4.5 m)
  • Auto-detects field installation of options including data logger and control relays

The Greyline AVFM 5.0 Area-Velocity Flow Meter includes a submerged ultrasonic sensor that is installed at the bottom of an open pipe or channel. Exposed materials are plastic so the sensor resists fouling and corrosion. It has no moving parts and no orifices, ports or electrodes.

The AVFM 5.0 displays and totalizes flow. It includes three 4-20mA outputs (Flow, Level and Velocity), plus two control relays for level alarms or flow proportionate pulse output for samplers and chlorinators. It is easy to calibrate with the built-in keypad and menu system. A built-in 2-million point data logger with RS232 output is optional. Intrinsic Safety Barriers for sensor and cable installation in hazardous rated channels is also optional.

Greyline AVFM 5.0 Area-Velocity Flow Meter Availability

Greyline AVFM 5.0 Area-Velocity Flow Meters are available in BC through Southwell Corp.

We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Request A Quote

Applications for Greyline Flow Meter Products

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote

Greyline TTFM 1.0 Ultrasonic Flowmeter

Greyline TTFM 1.0 Ultrasonic Flowmeter – Vancouver BC

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. The Greyline TTFM 1.0 Ultrasonic Flowmeter provides accurate Flow Measurement of Clean Liquids with Non-Contacting Transducers.

Greyline TTFM 1.0 Ultrasonic Flowmeter

Greyline TTFM 1.0 Transit Time Flowmeter with Clamp-on Ultrasonic Transducers

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Non-Contacting Flow Measurement
Ultrasonic transducers mount on the of plastic or metal pipes to measure flow rate of clean, non-aerated fluids like water, chemicals, and oils. The outside clamp-on transducers can be mounted without shutting down flow. There is no pressure drop and no obstruction. Transducer separation distance is calculated by the flowmeter according to pipe diameter and wall thickness.

User-Friendly Operating System
Use the built-in keypad for fast, easy calibration with menu selection of pipe diameter, pipe material, liquid type and measurement units (gallons, liters etc.) Settings, calibration values and totalizer are retained during power interruptions.

Measures Flow from the Outside of Metal and Plastic Pipes
The TTFM 1.0 Transit Time Flowmeter works by measuring the “transit time” or “time of flight” for ultrasonic sound pulses transmitted from one transducer to another. Depending on the mounting configuration, the signal may cross the pipe once, twice or four times.

The time between transmitted and received signals is precisely measured by the flow meter. Ultrasonic signals are sent upstream and then downstream with the transducers alternating their functions as transmitters/receivers.

The transit time in the direction of flow is always faster than the transit time against the  flow. By comparing these differences with precision timing circuits, the Greyline TTFM 1.0 Ultrasonic Flowmeter is able  to accurately calculate the flow rate. Because the ultrasonic signal is forced to cross the  pipe, an average of the flow profile is calculated. So compensation for laminar or  turbulent flow is automatic.

TTFM 1.0 transducers can be mounted on vertical or horizontal pipes. The pipe must be  full. Choice of V, Z or W mounting method depends on the application and pipe diameter. V-Mount is the most common method while Z-Mount is used for larger pipes or weak signal applications and W-Mount for smaller pipes.

Works with Clean Liquids
The TTFM 1.0 Transit Time Flowmeter is designed for flow measurement of clean, non-aerated liquids in full pipes. High concentrations of solids or gas bubbles (>2% by volume) will attenuate sound and the Transit Time ultrasonic signal may not be able to cross the pipe. A Greyline Doppler-type flow meter is recommended for applications with solids or bubbles (eg. wastewater or slurries).

Works from the of Outside of Common Pipe Materials
Mount the TTFM 1.0 ultrasonic transducers on the outside of metal or plastic pipes including carbon steel, stainless steel, ductile iron, cast iron, PVC, PVDF, fiberglass, copper, brass,
aluminum and pipes with bonded liners including epoxy, rubber and Teflon. Avoid pipes made with porous materials (e.g. wood or concrete) or with loose insertion liners.

Simple Menu System for Fast, Easy Start-up and Calibration
Calibration and start-up can be done in a few minutes. Use the built-in 5-button keypad to enter the pipe material and OD, wall thickness and fluid type. The TTFM 1.0 will display the correct transducer separation distance and mounting method. Secure the stainless steel pipe clamps and align the mounting brackets on the outside of the pipe. Put coupling compound (included) on the transducer faces and insert them into the mounting brackets. The Greyline TTFM 1.0 Ultrasonic Flowmeter will immediately begin to  display, transmit and totalize flow.

Transducer Installation in Wet Locations
The TTFM 1.0 Transit Time Flowmeter transducers are rated for accidental submersion up to 10 psi (0.75 bar). The flowmeter will continue to operate and measure flow accurately during periods of submergence. Plastic seal jackets on the cables can be filled with coupling compound to provide additional moisture protection for the BNC cable connectors.

Easy to Install
Install TTFM 1.0 Transit Time Flowmeter without cutting the pipe or shutting down  flow. It operates on a wide range of metal and plastic pipe sizes and just takes just a few minutes to calibrate and start-up.

The flowmeter works by injecting sound through the pipe wall and into the flowing  liquid. The transducers transmit ultrasonic signals back and forth. The up and downstream “transit times” are precisely measured and compared to calculate the flow rate. Advanced signal processing software and electronics suppress interference and
measure flow with high repeatability and ±0.5 to 2% accuracy.

TTFM 1.0 Advanced Features
Plug-and-play options including a 2-million point data logger and extra control relays can be installed at any time. Power consumption is low (4 Watts typical) with standard AC and optional DC power input. Display backlight brightness is adjustable and 4-20mA output and relays can be disabled to reduce power consumption.

The TTFM ultrasonic transducers are waterproof and designed to operate in wet environments or during accidental submersion. Transducer cable length can be field- extended up to 250 ft (75 m) with optional shielded cable and junction box.

Greyline TTFM 1.0 Ultrasonic Flowmeter Availability

The Greyline TTFM 1.0 Ultrasonic Flowmeter and other Greyline Flow Meters are available in BC through Southwell Corp.

We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Request A Quote

Applications for Greyline Flow Meter Products

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote

Greyline PTFM 1.0 Non-Contacting Ultrasonic Flow Meter

Greyline PTFM 1.0 Non-Contacting Ultrasonic Flow Meter – Vancouver BC

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. The Greyline PTFM 1.0 Portable Ultrasonic Flow Meter provides acccurate Flow Measurement of Clean Liquids with Non-Contacting Transducers.

Greyline PTFM 1.0 Non-Contacting Ultrasonic Flow Meter

Portable Transit Time Flow Meter with Clamp-on Ultrasonic Transducers

  • Displays and Totalizes
  • Data Logs and Transmits
  • Backlit LCD Display
  • Simple 5-key Calibration
  • Built-in Rechargeable Battery
  • Built-in Data Logger
  • 14 Digit Totalizer
  • 4-20mA Output

Call 1.844.599.0260 to request a Greyline PTFM 1.0 Non-Contacting Ultrasonic Flow Meter quote or email sales@SouthwellCorp.com

Non-Contacting Flow Measurement
Recommended for fluids like water, glycol, oil and most chemicals. The PTFM 1.0 ultrasonic transducers strap-on the outside of pipes from ½” to 48″ (13 to 1200 mm) diameter. The ultrasonic signal works through all common metal and plastic pipe materials. Transducers can be mounted without shutting down flow and there is no obstruction or pressure drop.

User-Friendly Operating System
Calibration is easy with the onscreen menu system. Just enter the pipe diameter, wall thickness and pipe material. The PTFM 1.0 is powered by an internal, rechargeable NiMH battery or can be operated continuously with AC power adapter. Each PTFM 1.0 includes a watertight carry case, transducer set, cables and mounting clamps.

Portable Ultrasonic Flowmeter for Troubleshooting, Calibration Checks and Balancing Flow

Measures Flow from the Outside of a Pipe
The Greyline PTFM 1.0 Non-Contacting Ultrasonic Flow Meter works by measuring the “transit time” or “time of flight” for ultrasonic sound pulses transmitted from one transducer to another. The transit time in the direction of flow is faster than the transit time against the flow. By comparing these differences with precision timing circuits, the PTFM 1.0 is able to accurately calculate the flow rate.

Greyline PTFM 1.0 Non-Contacting Ultrasonic Flow Meter

Choice of V, Z or W mounting method depends on the application and pipe diameter. VMount is the most common method while Z-Mount is used for larger pipes or weak signal applications and W-Mount for smaller pipes.

Works with Common Pipe Materials
Mount the ultrasonic transducers on the outside of metal or plastic pipes including carbon steel, stainless steel, ductile iron, cast iron, PVC, PVDF, fiberglass, copper, brass, aluminum and pipes with bonded liners including epoxy, rubber and Teflon. Avoid pipes made with porous materials (e.g. wood or concrete) or with loose insertion liners.

Measures Clean Liquids in Full Pipes
The Greyline PTFM 1.0 Non-Contacting Ultrasonic Flow Meter is designed to measure clean, non-aerated liquids like water, chemicals and oils with less than 2% solids or bubbles . The ultrasonic transducers can be mounted on vertical or horizontal pipes.

Simple Menu System for Easy Start-up and Calibration
Calibration and start-up can be done in a few minutes. Use the built-in 5-button keypad to enter the pipe material and OD, wall thickness and fluid type. The PTFM 1.0 will display the correct transducer separation distance. Secure the stainless steel pipe clamps and align the mounting brackets on the outside of the pipe. Put coupling compound (included) on the transducer faces and insert them into the mounting brackets. The PTFM 1.0 will immediately begin to display, transmit and totalize flow.

Built-in Data Logger with Windows Software Included
Set up the 300,000 point data logger to store time and date-stamped flow readings from 10 second to 5 minute intervals. View the convenient on-screen ‘Flow Report’ where total, minimum, maximum and average flow rates are stored in a 24 hour daily summary. Transfer flow logs to your PC or laptop through the PTFM 1.0′s USB outpu t. Greyline Logger software (included) displays data in both graph and table formats with one-click export to Microsoft Excel®, images or CSV files for use in other programs.

Non-Contacting Portable Flowmeter for Clean Liquids in Metal and Plastic Pipes

Easy to Install
The PTFM 1.0 Portable Transit Time Flow Meter is designed to measure clean liquids in full pipes . I t works by injecting sound through the pipe wall and into the flowing liquid. The battery-powered flow meter, transducers, mounting clamps and accessories are supplied with a rugged watertight carrying case. Use it for troubleshooting, flow studies and for testing calibration of inline flow meters. The PTFM 1.0 works on metal and plastic pipes and measures forward or reverse flow. A built-in data logger and Windows software is included.

Easy to Calibrate
Use the 5-button keypad and menu system to set up the flowmeter by entering the pipe material, diameter and wall thickness. The PTFM 1.0 calculates the transducer separation distance and mounting method automatically.

Greyline PTFM 1.0 Non-Contacting Ultrasonic Flow Meter Availability

The Greyline PTFM 1.0 Non-Contacting Ultrasonic Flow Meter and other Greyline Flow Meters are available in BC through Southwell Corp.

We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Request A Quote

Applications for Greyline Flow Meter Products

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote

Greyline LIT 25 Level Indicating Transmitter

Greyline LIT 25 Level Indicating Transmitter with Non-Contacting Ultrasonic Sensor 

Greyline LIT 25 Level Indicating Transmitter – Vancouver BC

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. The Greyline LIT 25 Level Transmitter provides Level Monitoring and Control for Chemical Storage Tanks, Sumps, Reservoirs and Lagoons.

Greyline LIT 25 Level Indicating Transmitter

Cost Effective, Non-Contacting Level Transmitter

  • Simple Calibration with 2-button keypad
  • Large 4-digit LCD display
  • Non-Contacting, no maintenance sensor
  • Isolated 4-20mA output (1000 ohm)
  • Relay for alarm or control
  • Automatic temperature compensation
  • Low Cost High accuracy (±0.25%)

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

The Greyline LIT25 Level Indicating Transmitter features a 4-20mA output rated up to 1000 ohms. This output is isolated and ready for direct connection to your PLC or Controller.

Mount the watertight display enclosure at a convenient location where the large, 4-digit LCD Display is visible to Operators. Use the built-in Keypad for calibration without climbing the Tank.

Use the LIT25 signal Relay output to control pumps and alarms. Calibrate for level, echo loss or temperature alarm.

Non-Contacting Sensor
The LIT25′s ultrasonic, echo-ranging sensor mounts at the top of the tank to continuously monitor level. No maintenance is required. A built-in temperature sensor is included to automatically compensate for changes in speed of sound due to temperature.

Level and temperature signals share a single coaxial cable which can be run up to 500 ft (152 m) to the electronics enclosure. The standard Sensor is rated for tank sizes up to 32 ft. (10 m) high, and is made with PVC and Teflon (an optional all-Teflon model is also available). The sensor and cable is rated intrinsically safe (with optional intrinsic safety barrier) for installation in hazardous rated tanks.

DESIGNED FOR OPERATOR CONVENIENCE

Mount the LIT25 Display enclosure at a convenient location for operators. The large LIT25 digital display indicates that it is calibrated in percent, inches or cm, and in RANGE or LEVEL mode. Relay status is also displayed and the ECHO symbol flashes to indicate that echos are being received normally.

Special LIT25 features like OUTPUT SIMULATION allow operators to test calibration, loop wiring, and relay set-points directly from the LIT25 keypad. Simplify calibration or tank measurement with the LIT25′s RANGE display – instantly display distance in inches or cm from the sensor to the target or liquid surface.

Greyline LIT 25 Level Indicating Transmitter Availability

The Greyline LIT 25 Level Indicating Transmitter and Grayline Flow Meters are available in BC through Southwell Corp.

We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Request A Quote

Applications for Greyline Flow Meter Products

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote

Greyline DFS 5.1 Doppler Flow Switch

Greyline DFS 5.1 Doppler Flow Switch – Vancouver BC

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. Greyline DFS 5.1 Doppler Flow Switch Controls Flow From Outside a Pipe using a Non-Contacting Sensor.

Greyline DFS 5.1 Doppler Flow Switch
 Greyline DFS 5.1 Doppler Flow Switch Clamp-on Flow Sensor Installs without cutting the pipe

  • No pressure drop
  • No sensor fouling
  • No maintenance

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Installs in Minutes No moving parts
Mount the DFS 5.1 ultrasonic sensor on the outside of metal or plastic pipes. The sensor continuously injects high frequency sound through the pipe wall and into the moving fluid where acoustic pulses are reflected back to the sensor from particles or bubbles in the fluid.

Ideal for “difficult” liquids. No contact, No maintenance
Flow rates of most liquids can be accurately controlled including acids, caustics, lubrication fluids, chemicals, abrasives, waste water and sludge. There are no moving parts and no sensor maintenance is required.

Easy Calibration
The compact, water tight electronics enclosure includes adjustable controls with separate ON and OFF relay set-points and time delay. A LED bar-graph for flow rate and set points plus relay status are included.

Installation can be made while the flow system is in full operation. No contact is made with the moving fluid and no holes are drilled in the pipe. There is no fouling or scale build-up on the sensor.

Non-Contacting Flow Control

Pump protection … High or Low flow control

Overfill alarm … Bargraph flow rate indication

No pipe cutting, No pressure drop, No sensor fouling, No maintenance!
It takes just a few minutes to install and calibrate a DFS 5.1 Flow Switch. The DFS 5.1 controls flow of most liquids in closed pipes. The ultrasonic sensor mounts on the outside of any pipe from 1/2″ to 180″ (12.5 mm to 4.5 m) I.D.

Easy to Calibrate
The DFS 5.1 control relay can be set to turn ON and OFF at any flow rate between 0.25 and 10 ft/sec (0.075 to 3 m/sec). Insert two links for separate ON/OFF set points or just one link for a Hi or Lo flow alarm. Set relay actuation time delay from 0 to 80 seconds.

Ideal for Pump Protection
Avoid expensive pump repairs and downtime. The DFS 5.1 strap-on Sensor can be installed in minutes without shutting down flow or cutting pipe. Use the adjustable relay time delay to eliminate relay “chatter” and reduce pump wear.

Reliable and Repeatable
Repeatability is ±0.1% of full scale (0.1 ft/sec or 0.003 m/sec). There are no moving parts and no maintenance is required. The clamp-on ultrasonic sensor cannot be damaged or fouled by contact with the liquid it measures. Sealed in a stainless steel housing, the DFS 5.1 sensor withstands moisture or accidental submersion in water up to 10 psi (69 Kpa).

Self-tunes to Extended Sensor Cable
Up to 500 ft (150 m) extra sensor coaxial cable can be added. Extended cable and junction box can be ordered from Greyline. The cable can be cut or extended as required during installation. The flow switch automatically tunes to the cable length. No circuit adjustment or calibration is required.

Designed for “difficult” liquids
The DFS 5.1 Doppler Flow Switch is recommended for flow control of liquids containing gas bubbles or solids: chemicals, slurries, sewage, sludge, viscous liquids, wastewater, caustics and abrasives. The ultrasonic sensor injects high frequency sound through the pipe wall into the flowing liquid. Acoustic pulses are continuously reflected back to the sensor and the DFS 5.1 measures a frequency shift to calculate flow velocity.

Easy to Install
The DFS 5.1 flow sensor installs without cutting the pipe. It takes just a few minutes to mount on the outside of any pipe. The switch/electronics enclosure can be mounted 20 ft (6 m) away from the sensor (optional up to 500 ft / 152 m) to simplify wiring to pumps, alarms, valves or other equipment.

Switch adjustments and electrical connections are fast and easy. The DFS 5.1 relay time delay is adjustable from 0 to 80 seconds to prevent nuisance alarms and relay “chatter” in turbulent flow. Includes switch selectable “normal” and “failsafe” operating modes.

Choose the DFS 5.1 Flow Switch for:

  • No contact with the measured liquid
  • No obstruction to flow – No pressure drop
  • Sensor mounts easily on the outside of the pipe
  • Can be installed while pipe line is in use
  • Insensitive to pressure, specific gravity and conductivity
  • Does not require pipe metering sections
  • Does not require consideration of material compatibility with the liquid

Greyline DFS 5.1 Doppler Flow Switch Availability

The Greyline DFS 5.1 Doppler Flow Switch  and other Greyline Flow Meters are available in BC through Southwell Corp. We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Request A Quote

Applications for Greyline Flow Meter Products

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote

Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter

Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter

Multi-Sensor Area-Velocity Flow Meter – Vancouver BC

At Southwell Corp, we have been selling and supporting Greyline flow meters in Vancouver and throughout BC for over 15 years. We recommend the Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter to Display, Transmit and Totalize Flow in Large Open Channels, Pipes and Culverts.

Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter

AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter

  • Display, Transmit and Totalize Flow
  • Large Open Channels, Pipes and Culverts
  • Multiple Velocity Sensors
  • Simple 5-key Calibration
  • Three 4-20mA Outputs
  • Two Control Relays
  • Works in Irregular Channel Shapes
  • Works in Irregular Flow Profiles

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Measures Velocity and Level to Monitor Flow with Multiple Ultrasonic Sensors
Monitor flow through large open channels, partially full sewer pipes and surcharged pipes without a flume or weir. Designed for municipal stormwater, stream flow, irrigation water, raw sewage, water intake channels, cooling water discharges and industrial effluent.

Submersible Ultrasonic Sensors
The AVMS 5.1 uses three submerged ultrasonic sensors to continuously measure both Velocity and Level in the channel. It is recommended for large channels or applications where velocity will vary across the width of the channel. The sensors resist fouling, corrosion and abrasion. The Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter offers excellence in flow meter technology.

The flowmeter can be configured with three standard submerged velocity-level sensors, or with three submerged velocity plus a separate non-contacting ultrasonic level sensor.

View flowrate and total flow on the large backlit LCD display and connect to external devices with three 4-20mA outputs and two control relays.

Multi-Sensor Flow Monitor for Open Channels & Partially Filled Pipes
The AVMS 5.1 Area-Velocity Flow Meter measures level and average velocity from multiple sensors to calculate flow in open channels or pipes. The system includes the AVMS 5.1 flowmeter with interconnect cable to a multi-sensor enclosure plus three submerged ultrasonic sensors.

The ultrasonic velocity sensors mount in the channel in positions where they will be submerged. Stainless steel mounting brackets included. The sensors are completely sealed with no orifices or ports. Level is measured by connecting the built-in level sensor from any one of the three velocity sensors, or with an optional non-contacting ultrasonic level sensor.
Greyline AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter

Q = V x A
To measure flow the AVMS 5.1 averages the velocity readings from its three submerged sensors. The level reading and channel dimensions provide the channel cross sectional area. Calibration is simple: enter the pipe diameter or channel dimensions and the AVMS 5.1 automatically computes and displays flow volume. Channels of virtually any shape can be monitored with your choice of measurement units.

Recommended Pipe or Channel Conditions
Channels greater than 2 m (6 ft) width or diameter may have significant variations in velocity across the channel width. By mounting three velocity sensors an average velocity profile is measured. The AVMS 5.1 will automatically factor out zero readings at low flow rates if one or more sensors are not submerged or become covered in sediment.

Careful selection of mounting location results in best performance and maintenance-free operation. Avoid locations where sediment builds up. The channel should not have drops or direction changes immediately upstream of the sensor and it should have a consistent cross section for one channel width upstream. Pipe or channel slope should not exceed 3%.

The AVMS 5.1 can measure forward velocity up to 20 ft/sec (6 m/sec) and up to 5 ft/sec (1.5 m/sec) reverse velocity. The electronics and software sample and average flow rates continuously to provide stable readings. The submerged velocity/level sensors will measure flow in partially full channels, culverts or surcharged pipes with pressure up to 10 psi.

Sensor Mounting Configurations
Sensors can be positioned across the channel to capture variations in flow velocity. One of the sensors is also used to measure level so it must be mounted at the bottom of the channel parallel to the water surface.

Optional Non-Contacting Level Sensor
An optional, non-contacting ultrasonic level sensor can be used for applications with turbulence or where level measurement from the channel bottom may be restricted by aeration or sediment. Each individual velocity and level sensor cable can be extended up to 500 ft (150 m) total length using an optional cable junction box.

The AVMS 5.1 Multi-Sensor Area-Velocity Flow Meter includes three submerged ultrasonic sensors that are installed in an open pipe or channel. The sensors have no moving parts and no orifices, ports or electrodes. Each sensor is installed with a stainless steel mounting bracket and one screw into the pipe or channel wall.

Channels of any shape can be monitored. Forward and reverse flow can be measured and totalized. The AVMS 5.1 includes three 4-20mA outputs ( flow, level and velocity), plus two control relays for level alarms or flow proportionate pulse output for samplers and chlorinators.

The AVMS 5.1 is easy to calibrate with its 5-button keypad and menu system. Extra relays and a built-in 2-million point data logger with USB output are optional.

Greyline Flow Meters are available in BC through Southwell Corp. We ship to Vancouver, Victoria, Burnaby, New Westminster, Surrey, Abbotsford, Kelowna, Kamloops, Vancouver Island, Prince George and every other town in BC.

Call 1.844.599.0260 to request a quote or email sales@SouthwellCorp.com

Request A Quote

Applications for Greyline Flow Meter Products

Greyline Flow Products are known across many industries as reliable sources of data for your flow systems.

Discuss the specific needs of your project with one of Fiberman’s Greyline flow meter experts. We will ensure that the model you select will have the specifications required for safety and optimum performance. You will also benefit from our industry-leading quick quote turnaround and fast delivery across Canada and the US.

For all Greyline Flow Meter inquiries, please call 1.844.599.0260 or email sales@fiberman.ca or Request a Quote.

FIBERMAN-super-hero-of-greyline-flow-meters-in-canada-distributor of Greyline Flow Products

1.844.599.0260

Our Flow Meter experts are ready to help.

Bulk and Wholesale Discounts Available on Large Orders

Our Pultruded Fiberglass Grating distribution shipping Greyline Flow Products equivalent to your location.

All our Greyline Flow Products meets required specs Fast Delivery across Canada and USA via our Superior Logistics Network

We can ship Greyline Flow Meters from a distribution center close to you:

Fiberman’s headquarters in Western Canada stocks many Greyline Flow Meter models, ready to ship across British Columbia, Alberta and all provinces in Canada. We have daily shipments from Vancouver to destinations including Edmonton, Calgary and Fort McMurray. For our US customers, we ship from distribution centers in: Pittsburgh, PA; Houston, TX; Knoxville, TN; Rochester, MN; Salt Lake City, Utah; and Orlando, FL.

Fiberman’s pricing and service experts are standing by to help to find the best product for your project. With many varieties in stock and expedited shipping, we can supply your project with flow meters at the best possible price with fast delivery.

Fiberman offers Greyline Flow Products

Fiberglass and Radio Frequency Transparency

In today’s connected world, we depend on cellular telephone signals, Wi-Fi networks and over the air radio and television signals. Wi-Fi and Bluetooth connectivity are essential to on-site work environments. Steel structures significantly disrupt these signals. Fiberglass Grating is an essential part of building structures that are “electronically transparent” and do not interfere with radio frequency transmissions.

Request A Quote